The Texas Instruments TPS7A74 Low Loss (LDO) Linear regulator provides an easy-to-use, robust power management solution for a variety of applications. User programmable soft start minimizes the pressure on the input power supply by reducing the capacitance inrush during startup
The REC300H-W series is a newly launched half brick DC/DC converter with a rated power of 300W. It can provide 9V to 36VDC wide input and 12V, 15V, 24V and 48VDC output options. The isolation voltage is 3kVDC/1 minute. These new DC/DC converters are very suitable for applications requiring wide input and multiple output options, including telecommunications, industry, aerospace and PoE.
Diodes further strengthens its range of PCIe solutions with a new ReDriver device with high data rates. PI2EQX16924 is a PCIe 4.0 ReDriver that can operate over a 1.8V rail, while competing solutions require 3.3V rail, making it suitable for a wide variety of computing and data communication applications.
Toshiba Electronics Components and Memory announced the expansion of its Smart gate drive optocoupler product line with the introduction of the "TLP5222" smart gate drive optocoupler with output current of 2.5A. It is an isolated gate drive IC that provides overcurrent protection for power devices such as MOSFET or IGBT, with built-in protection operation automatic recovery function
ROHM has developed a step-down DC-DC converter IC*1 "BD9S402MUF-C" for increasingly complex on-board applications such as ADAS (Advanced Driver assistance systems) and infotainment systems, including on-board sensors and cameras.
Infineon Technologies AG has introduced the XDP XDP710 digital controller, the first member of its intelligent hot-swap controller and protection IC family. The hot-swap and system monitoring controller IC provides a 5.5V to 80V input voltage range with transients up to 100V for 500ms. It comprises three functional blocks.
Microchip Technology's PIC32CM LE00, LS00 and LS600 (PIC32CM Lx) ultra-low power MCU. With 32-bit performance, ultra-low power characteristics, and memory configurations of up to 512KB flash memory and 64KB SRAM, the PIC32CM Lx series offers three different product options for designers seeking to address challenges in the Internet of Things (IoT), consumer, industrial and medical markets.
The LTC3351 is a rechargeable standby power controller and monitors a series stack of one to four supercapacitors. The LTC3351's synchronous step-down controller drives constant-current/constant-current programmable input current-limiting voltage charging of an n-channel mosfet.
Texas Instruments AMC23C11 Precision Isolation comparator has short response time. The open drain output is separated from the input circuit by an anti-magnetic interference isolation barrier. According to VDE 0884-17 and UL1577, the barrier provides enhanced electrical isolation up to 5kV(RMS). It also supports operating voltages up to 1kV(PK).
The Texas Instruments UCC21737-Q1 single-channel gate driver is an electrically isolated gate driver designed for use with SiC MOSFets and IGBTs at DC operating voltages up to 2121V, with advanced protection features, best-in-class dynamic performance and robustness. The device has a peak source and convergent current of up to ±10A.
The AS7331 is an integrated UV sensor with low power and low noise. The three channels, namely UVA, UVB and UVC, convert the optical radiation signal into digital signal through photodiode, realizing a new optical radiation transmission mode of continuous or triggered measurement Irradiation responsivity can be adjusted by gain, conversion time and internal clock frequency to affect sensitivity, full range and LSB.
Flex Power Modules is now available with BMR320, a non-isolated, non-regulated DC-DC intermediate bus converter with a fixed 8:1 input/output voltage ratio and compact appearance. Operating in the 40-60 VDC input voltage range, the product produces an output voltage of 5 to 7.5 VDC, ideal for powering point-of-load converters at lower intermediate bus voltages to optimize system efficiency.
Vishay Intertechnology, Inc, announced the launch of Vishay's first 19.0mm x 17.1mm x 7.0mm 6767 high temperature inductor with A current rating up to 155 A and in compliance with the AEC-Q200 standard. Suitable for applications such as automotive engine nacles and advanced driver assistance systems (ADAS), the DC internal resistance (DCR) is 50 percent lower than that of normal power inductors and is smaller in size than similar ferrite solutions.
The DCF filter series is from ECS Inc. International and is developed with an eye to the future. These high performance ceramic monolithic bandpass filters provide low insertion loss without compromising performance. DCF series filters cover center frequencies from 5235 MHz to 5850 MHz, providing bandwidth from 180 MHz to 1200 MHz, and a series of extension products are forthcoming.
Flex Power Modules' PIM4610 and PIM4710 pci simplify blade server design based on advanced tca standards and other applications. PIM4x10 modules are rated for power up to 1080 W with an efficiency level of up to 98.8%. They have input ranges from 36 V(DC) to 75 V(DC). The module is an industry standard quarter brick sized package featuring unique PIM nails.
TAS2110 is a class H boost in QFN package of 11V amplifier with algorithm control for digital input class D audio. Future algorithms are expected to optimize the boost voltage level to match the output of audio signals. This provides all the power required for peak output while lowering the average value with a constant output lift. The algorithm is configured using the PurePath console GUI.
The AD5770R is a 6-channel, 14-bit resolution, low-noise, programmable current-output digital-to-analog converter (DAC) for photonics control applications. The device includes a 1.25V, on-chip voltage reference, 2.5kΩ precision resistor reference current generation, die temperature, output monitoring function, fault alarm, and reset function.
