The AD22105 is a solid state thermostatic switch. Requiring only one external programming resistor, the AD22105 can be set to switch accurately at any temperature in the −40°C to +150°C wide operating range. Using a novel circuit architecture, the AD22105 asserts an open-collector output when the ambient temperature exceeds the user-programmed setpoint temperature. The AD22105 has approximately 4°C of hysteresis, which prevents rapid thermal on and off cycling
The AD7401A1 is a second-order sigma-delta (Σ-Δ) modulator that converts analog input signals into high-speed 1-bit data streams with digital-on-chip isolation based on Analog Devices, Inc. 's iCoupler technology. Operates from a 5v power supply and accepts a pseudo-differential input signal of ±250 mV(±320 mV full scale). The device contains an on-chip reference. The AD7401A uses a 16-pin SOIC and operates in the temperature range −40°C to +125°C.
The ST3243E device consists of 3 drivers, 5 receivers and a dual charge-pump circuit. The device meets the requirements of EIA/TIA and V.28/V. 24 communication standards providing high data rate capability and enhanced electrostatic discharge (ESD) protection. All transmitter outputs and receiver input are protected to ± 8 kV USING IEC 1000-4-2 contact discharge and ± 15 kV using the human body model. The receiver R2 is always active to implement a wake-up feature for serial port
The multi-switch detection interface is designed to detect the closing and opening of up to 22 switch contacts. The switching state, on or off, is transmitted to the microprocessor unit (MCU) via the Serial Peripheral Interface (SPI). The device also has a 22-to-1 analog multiplexer for reading analog inputs. 33993 adopts 32-pin wide-body SOIC package to reduce the area of the circuit board. The low rest current makes the 33993 ideal for automobiles and industrial products that require low sleep state current
The AD7224 is a precision 8-bit voltage output, digital-to-analog converter, output amplifier and dual buffered interface logic on a single chip CMOS chip. No external decoration is required to achieve the full specified performance of this part. The dual-buffer interface logic consists of two 8-bit registers -- an input register and a DAC register. Manufactured using a full ion-implanted high speed linearly compatible CMOS (LC2 MOS) process, a process specifically developed for integrating high speed digital logic circuits and precision analog circuits on the same chip
The MAX17515 is a fixed-frequency, step-down power module in a thermally efficient system-in-package (SiP) package that operates from a 2.4V to 5.5V input supply voltage and supports output currents up to 5A. The device includes switch-mode power-supply controller, dual nMOSFET power switches, a fully shielded inductor, as well as compensation components. The device supports 0.75V to 3.6V programmable output voltage.
The LM2672 series of regulators are monolithic integrated circuits built with a LMDMOS process. These regulators provide all the active functions for a step-down (buck) switching regulator, capable of driving a 1A load current with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5.0V, 12V, and an adjustable output version
The ST2S06A33 and ST2S06B are dual stepdown DC-DC converters optimized for powering low-voltage digital cores in ODD applications and, generally, to replace high current linear solutions when the power dissipation may cause high heating of the application environment. It provides up to 0.5 A over an input voltage range of 2.5 V to 5.5 V.
The SC4201 is a multiphase link controller designed for isolated and non-isolated applications. Its operating frequency can be programmed to exceed 2MHz per phase (oscillator frequency = phase frequency multiplied by the number of phases 3 or 4), and can be easily synchronized with external, faster frequencies.
The LT8580 is a PWM DC/DC converter containing an internal 1A, 65V switch. It comes in a miniature thermal enhanced 3mm x 3mm 8-pin DFN and 8-pin MSOP package.
The ADR280 is a 1.2V band-gap core benchmark with excellent line conditioning and power suppression, designed for applications that experience a large number of dynamic power changes, and it is available in compact 3-pin SOT-23 and SC70 packages. The equipment is suitable for extended industrial temperature ranges from −40°C to +85°C.
The MIC59P60 serial-input latched driver is a high-voltage (80V), high-current (500mA) integrated circuit comprised of eight CMOS data latches, a bipolar Darlington transistor driver for each latch, and CMOS control circuitry for the common CLEAR, STROBE, CLOCK, SERIAL DATA INPUT, and OUTPUT ENABLE functions. Similar to the MIC5842, additional protection circuitry supplied on this device includes thermal shutdown, under voltage lockout (UVLO), and overcurrent shutdown.
The CS5460A is a highly integrated power measurement solution that combines two analog-to-digital converters (ADCs), high-speed power computing capabilities, and a serial interface on a single chip. In automatic startup mode, the CS5460A reads calibration data and startup instructions from an external EEPROM. In this mode, the CS5460A can be operated without a microcontroller to reduce the total bill of materials cost.
The AD842 is a member of the Analog Devices, Inc. family of wide bandwidth operational amplifiers. This device is fabricated using the Analog Device junction isolated complementary bipolar (CB) process. This process permits a combination of dc precision and wideband ac performance previously unobtainable in a monolithic op amp. In addition to its 80 MHz gain bandwidth product, the AD842 offers extremely fast settling characteristics, typically settling to within 0.01% of final value in less than 100 ns for a 10 V step
The TLV2231 is a low-voltage operational amplifier in the SOT-23 package. It provides 2 MHz bandwidth and a conversion rate of 1.6 V/µs for applications requiring good AC performance. The device displays rail-to-rail output performance to increase dynamic range in single or split power applications.
The LTM4622 is a complete dual 2.5A step-down switching mode µModule (powermodule) regulator in a tiny ultrathin 6.25mm × 6.25mm × 1.82mm LGA and 6.25mm × 6.25mm × 2.42mm BGA packages. Included in the package are the switching controller, power FETs, inductor and support components. Operating over an input voltage range of 3.6V to 20V, the LTM4622 supports an output voltage range of 0.6V to 5.5V, set by a single external resistor. Its high efficiency design delivers dual 2.5A continuous, 3A peak, output current. Only a few ceramic input and output capacitors are needed
MICRF001 is a single-chip OOK (ON-OFF Keyed) receiver IC for remote wireless applications using Micrel's latest QwikRadiotm technology. The device is a true "antenna in, data out" monolithic device. Because MICRF001 is a true single chip radio receiver, it is very easy to apply, minimizes design and production costs, and reduces time to market.
The TC6320 consists of high-voltage, low-threshold N-channel and P-channel MOSFETs in 8-lead SOIC and DFN packages. Both MOSFETs have integrated gate-to-source resistors and gate-to-source Zener diode clamps which are desired for high-voltage pulser applications.
