STMicroelectronics IIS328DQ 3-axis linear accelerometer is an ultra low-power high-performance accelerometer with an SPI or I2C compatible digital serial interface.
The new STM32L4 series 32-bit microcontrollers from STMicroelectronics (ST). The ultra low-power STM32L4 MCUs are based on the high-performance ARM Cortex-M4 32-bit RISC core operating at a frequency of up to 80MHz.
Based on the high-performance ARM Cortex-M4 32-bit RISC core, operating at frequencies up to 80MHz, the STMicroelectronics STM32L486xx series of ultra low-power microcontrollers.
STMicroelectronics’ STPA008 MOSFET quad bridge power amplifier is hailed as a breakthrough class AB audio power amplifier designed for high-power vehicle radio systems. The fully-complementary P-channel / N-channel output structure allows a rail-to-rail output voltage swing.
The STM32F7 series 32-bit microcontrollers and the STM32F746G Discovery Kit from STMicroelectronics (ST). With ST’s ART Accelerator as well as an L1 cache, the STM32F7 devices deliver the maximum theoretical performance of the ARM Cortex M7, whether code is executed from embedded Flash or external memory, says the company.
The ultra compact STMicroelectronics HTS221 capacitive digital sensor is aimed at relative humidity and temperature applications. The device includes a sensing element and a mixed-signal ASIC to provide the measurement information through digital serial interfaces.
The STMicroelectronics VN5160S-E is a monolithic device made using proprietary VIPower M0-5 technology. It is intended for driving resistive or inductive loads with one side connected to ground. Active VCC voltage clamp protects the device against low energy spikes.
The STMicroelectronics I3G4250D three-axis digital output gyroscope, a low-power angular rate sensor able to provide unprecedented stability at zero-rate level and sensitivity over temperature and time.
The STMicroelectronics SR2HARU, a smart reset devices which provide a useful feature that ensures inadvertent short reset push-button closures do not cause system resets. This is done by implementing extended Smart Reset input delay time (tSRC) and combined push-button inputs, which together ensures a safe reset and eliminates the need for a specific dedicated reset button.
STMicroelectronics’ H3LISx00 three-axis digital accelerometers are aimed at applications such as shock detection, impact recognition and logging.
The STMicroelectronics STM32F7, a 32-Bit MCU+FPU are based on the high-performance ARM Cortex-M7 32-bit RISC core operating at up to 216MHz.
The STM32F7 series of high-performance MCUs with ARM Cortex-M7 core takes advantage of STMicroelectronics’ ART Accelerator as well as an L1 cache to deliver the maximum theoretical performance of the Cortex-M7, says the company.
The high-efficiency STMicroelectronics L99LD01 constant-current LED driver is aimed at applications such as automotive day time running lights and LED headlamps.
The STMicroelectronics EVAL6491HB demonstration board for the L6491 gate driver. The board evaluates all of the L6491 features while driving a power switch with voltage rating up to 600V in a TO-220 or TO-247 package.
The STMicroelectronics MP45DT02 compact low-power top-port, omnidirectional digital MEMS microphone. The device is built with a sensing element and an IC interface with stereo capability. The sensing element, capable of detecting acoustic waves, is manufactured using a specialized silicon micromachining process to produce audio sensors.
The STEVAL-ISA162V1 Evaluation Board from STMicroelectronics. The new evaluation board implements an isolated flyback (12V/0.84A) 10W wide-range mains developed for general-purpose applications. The core of the application is the VIPer25HD, an off-line, high-voltage converter from the ST’s VIPerPlus family.
The STMicroelectonics LSM6DS3 is a system-in-package inertial module featuring a 3D digital accelerometer and a 3D gyroscope performing at 1.25mA (up to 1.6kHz ODR) in high-performance mode and enabling always-on low-power features for an optimal motion experience for the user.
EVLSTNRG Series evaluation boards are designed for evaluating the STMicroelectronics STNRG388A digital controller in off-line power conversion applications such as EV battery chargers, UPS and digital industrial power supplies.
